ESP8285 Infrared Receiving and Transmitting WiFi Remote Control Switch Module Development Learning Board

ESP8285 Infrared Receiving and Transmitting WiFi Remote Control Switch Module Development Learning Board
ESP8285 Infrared Receiving and Transmitting WiFi Remote Control Switch Module Development Learning BoardESP8285 Infrared Receiving and Transmitting WiFi Remote Control Switch Module Development Learning BoardESP8285 Infrared Receiving and Transmitting WiFi Remote Control Switch Module Development Learning Board


Get ESP8285 Infrared Receiving and Transmitting WiFi Remote Control Switch Module Development Learning Board


null
Note:

When power is supplied, please check 5V and GND carefully. The circuit has no reverse connection protection, and the wrong connection may burn the chip.
When programming the program, IO0 and GND must be short-circuited, and the module needs to be powered on again. After programming, disconnect IO0 and GND and power on again to run the program normally.

Connect with TTL downloader:

GND--GND
5V--5V
RX--TX
TX--RX



Package includes:

1 x Board




ESP8285 Infrared Receiving and Transmitting WiFi Remote Control Switch Module Development Learning BoardSee detail


Popular posts from this blog

PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation

Image
Get PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation Feature:    Product name: simple controller Model: CW-S01 It can generate PWM signal. There is a jumper on the board, which can be set and selected. By default, it is set to generate pulse frequency signal.   Product Manual: 1. When the controller generates a pulse frequency signal, it can supply a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver. (This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.) 2. The controller can generate a pulse frequency signal or a PWM pulse width signal. There is a jumper on the board, which can be set and selected. By default, they are set to generate pulse frequency signals. REQ is to generate pulse frequency signal PWM is to generate PWM signal 3. When the controller generates a pulse frequency signal, there are three types of high, medium and low
Read more

DC3.7V/5V/12V 433MHz Wide Voltage 2 Way Remote Control Switch Miniature Universal Learning Code Normal Open and Close

Image
Get DC3.7V/5V/12V 433MHz Wide Voltage 2 Way Remote Control Switch Miniature Universal Learning Code Normal Open and Close Feature: Product model: AK-WK02CA Product Name: Two micro controller Working voltage: 3.7V-12V (minimum 4V required for jog mode) Power consumption situation: Standby current is only 7MA, working is 30MA current Coding method: learn code pairing, can learn fixed code and learning code chip remote control Working frequency: 433MHz Working mode: Jog (default), self-locking, interlocking Load size: <= 1A (equipment within 12W for safe use) Product size: 20 x 22 x 12mm How to use: Learning method and step description:   1. Jog mode: Hold down the learning button, press the button  once  when the indicator light, short press A button, the indicator light flashes twice, then short press B button, the indicator light flashes twice, it is “jog mode'' Learning success. 2. Self-locking mode: Hold down the learning button,  press the button  once  when the indicat
Read more