10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino

10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino
10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino


Buy 10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino


>>>Manual: Click here to open<<<

Features:
 
- These 7-segment displays normally require 13 pins (5 characters and 8 total segments each).
- Solves the annoyance of using 13 pins or a bunch of chips by having an I2C constant-current matrix controller sit neatly on the back of the PCB.
- The controller chip takes care of everything, drawing all the LEDs in the background.
- All you have to do is write data to it using the 2-pin I2C interface.
- There are three address select pins so you can select one of 8 addresses to control up to 8 of these on a single 2-pin I2C bus (as well as whatever other I2C chips or sensors you like).
- The driver chip can din the entire display from 1/16 brightness up to full brightness in 1/16th steps.
- It can't din individual LEDs, only the entire display at once.
- Size: 5.03 x 2.68 x 1.2 cm/2 x 1.1 x 0.5 inch
 
Package Included:
 
10 x 4 Digit 7-Segment 0.56' LED Display Tube
















10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For ArduinoBuy Now


Popular posts from this blog

PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation

Image
Get PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation Feature:    Product name: simple controller Model: CW-S01 It can generate PWM signal. There is a jumper on the board, which can be set and selected. By default, it is set to generate pulse frequency signal.   Product Manual: 1. When the controller generates a pulse frequency signal, it can supply a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver. (This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.) 2. The controller can generate a pulse frequency signal or a PWM pulse width signal. There is a jumper on the board, which can be set and selected. By default, they are set to generate pulse frequency signals. REQ is to generate pulse frequency signal PWM is to generate PWM signal 3. When the controller generates a pulse frequency signal, there are three types of high, medium and low...
Read more

AS5048A Magnetic Encoder Module Set PWM SPI Interface 14-bit Brushless PTZ Rotary Sensor for Brushless Motor

Image
Get AS5048A Magnetic Encoder Module Set PWM SPI Interface 14-bit Brushless PTZ Rotary Sensor for Brushless Motor Feature: The as5048a is a 14-bit rotating position sensor for absolute Angle measurement and PWM (= pulse width modulation) at 360° based on contactless magnetic sensor technology for full rotation output. The device is suitable for shaft applications where a simple diode magnet turns the sensor IC above or below and the zero can be programmed into the device with simple SPI commands. The absolute magnetic Angle position resolution is 14 bits = 16384 for position measurements, each converted to a digital value of the serial interface (SPI).   The AS5048 provides PWM output and SPI or I2C interfaces to provide absolute Angle measurements for microcontrollers. Instead of thinking about the exact pairing of the chip's initial zero and the magnetic poles it USES, mechanical design allows the zero to be programmed into AS5048's internal memory at assembly time with a sim...
Read more