CJMCU-Virtual Keyboard Badusb USB with TF Memory Card Slot Keyboard ATMEGA32U4

CJMCU-Virtual Keyboard Badusb USB with TF Memory Card Slot Keyboard ATMEGA32U4
CJMCU-Virtual Keyboard Badusb USB with TF Memory Card Slot Keyboard ATMEGA32U4CJMCU-Virtual Keyboard Badusb USB with TF Memory Card Slot Keyboard ATMEGA32U4CJMCU-Virtual Keyboard Badusb USB with TF Memory Card Slot Keyboard ATMEGA32U4


Get CJMCU-Virtual Keyboard Badusb USB with TF Memory Card Slot Keyboard ATMEGA32U4


Description:
 
Badusb, USB, MicroSD virtual keyboard, TF memory Leonardo
Size: 21mm * 30mm
Initialization SD card ... initialization failure thing to check:
* Yes, is a card inserted?
* is your wiring correct?
* did you change the chip select pin to match your shield or module? 
Initializing SD card... Wiring is correct and a card is present.
Card Type: SDHC
The volume type is FAT32
Volume size (bytes): 3519021056
Volume Size (KB): 3436544
Volume size (Mbytes): 3356
File found on the card (name, date, and size, in bytes)
 
 Package includes:

1 x CJMCU-Virtual Keyboard




CJMCU-Virtual Keyboard Badusb USB with TF Memory Card Slot Keyboard ATMEGA32U4See detail


Popular posts from this blog

PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation

Image
Get PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation Feature:    Product name: simple controller Model: CW-S01 It can generate PWM signal. There is a jumper on the board, which can be set and selected. By default, it is set to generate pulse frequency signal.   Product Manual: 1. When the controller generates a pulse frequency signal, it can supply a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver. (This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.) 2. The controller can generate a pulse frequency signal or a PWM pulse width signal. There is a jumper on the board, which can be set and selected. By default, they are set to generate pulse frequency signals. REQ is to generate pulse frequency signal PWM is to generate PWM signal 3. When the controller generates a pulse frequency signal, there are three types of high, medium and low
Read more

QF1022-A-100S 220V AC Power-on Delay 0-100S Adjuatable Timer Switch Automatic Disconnect Relay Module Dry Contact Output

Image
Buy QF1022-A-100S 220V AC Power-on Delay 0-100S Adjuatable Timer Switch Automatic Disconnect Relay Module Dry Contact Output Specification:   Delay adjustment resolution: 100 levels, that is, the minimum range of 100 minutes can be adjusted to 1 minute, 1 minute per division. Delay error: 2% Standby power consumption: 0.8W Load capacity: 10A 250V AC or 10A 30V DC PCB size: 58mm * 43mm, height <20mm QF1022-A-100S: Power on immediately, automatically off after a period of time, up to 100 seconds   Applications:   Home appliances, lighting delay modification, factory equipment delay control.   Warmly Noted:   The whole board is equipped with 220V voltage. It is necessary to pay attention to safety during installation and debugging to avoid personal injury from electric shock.   Package Included:   1 x QF1022-A-100S 220V AC Power-on Delay 0-100S Adjuatable Timer Switch QF1022-A-100S 220V AC Power-on Delay 0-100S Adjuatable Timer Switch Automatic Disconnect Relay Module Dry Contac
Read more

DC3.7V/5V/12V 433MHz Wide Voltage 2 Way Remote Control Switch Miniature Universal Learning Code Normal Open and Close

Image
Get DC3.7V/5V/12V 433MHz Wide Voltage 2 Way Remote Control Switch Miniature Universal Learning Code Normal Open and Close Feature: Product model: AK-WK02CA Product Name: Two micro controller Working voltage: 3.7V-12V (minimum 4V required for jog mode) Power consumption situation: Standby current is only 7MA, working is 30MA current Coding method: learn code pairing, can learn fixed code and learning code chip remote control Working frequency: 433MHz Working mode: Jog (default), self-locking, interlocking Load size: <= 1A (equipment within 12W for safe use) Product size: 20 x 22 x 12mm How to use: Learning method and step description:   1. Jog mode: Hold down the learning button, press the button  once  when the indicator light, short press A button, the indicator light flashes twice, then short press B button, the indicator light flashes twice, it is “jog mode'' Learning success. 2. Self-locking mode: Hold down the learning button,  press the button  once  when the indicat
Read more