10pcs FT232RL FT232 RS232 FTDI Micro USB to TTL 3.3V 5.5V Serial Adapter Module Download Cable for Mini Port

10pcs FT232RL FT232 RS232 FTDI Micro USB to TTL 3.3V 5.5V Serial Adapter Module Download Cable for Mini Port
10pcs FT232RL FT232 RS232 FTDI Micro USB to TTL 3.3V 5.5V Serial Adapter Module Download Cable for Mini Port 10pcs FT232RL FT232 RS232 FTDI Micro USB to TTL 3.3V 5.5V Serial Adapter Module Download Cable for Mini Port 10pcs FT232RL FT232 RS232 FTDI Micro USB to TTL 3.3V 5.5V Serial Adapter Module Download Cable for Mini Port


Buy 10pcs FT232RL FT232 RS232 FTDI Micro USB to TTL 3.3V 5.5V Serial Adapter Module Download Cable for Mini Port


Features:
 
- Adopt FTDI FT232RL chip;
- Leads out all signal ports of the FT232RL chip, TTL/CMOS level;
- RXD/TXD transceiver communication indicator;
- USB powered, selectable 5V or 3.3V interface level (if other levels are required, the target voltage can be supplied directly on the VCC and GND pins)
- Size: 21x31mm
 
Package Included:
 
10 x FT232RL FT232 RS232 FTDI USB to TTL 3.3V 5.5V Serial Adapter
















10pcs FT232RL FT232 RS232 FTDI Micro USB to TTL 3.3V 5.5V Serial Adapter Module Download Cable for Mini Port Buy Now


Popular posts from this blog

PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation

Image
Get PWM Stepper Motor Driver Simple Controller Speed Controller Forward and Reverse Control Pulse Generation Feature:    Product name: simple controller Model: CW-S01 It can generate PWM signal. There is a jumper on the board, which can be set and selected. By default, it is set to generate pulse frequency signal.   Product Manual: 1. When the controller generates a pulse frequency signal, it can supply a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver. (This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.) 2. The controller can generate a pulse frequency signal or a PWM pulse width signal. There is a jumper on the board, which can be set and selected. By default, they are set to generate pulse frequency signals. REQ is to generate pulse frequency signal PWM is to generate PWM signal 3. When the controller generates a pulse frequency signal, there are three types of high, medium and low
Read more

DC3.7V/5V/12V 433MHz Wide Voltage 2 Way Remote Control Switch Miniature Universal Learning Code Normal Open and Close

Image
Get DC3.7V/5V/12V 433MHz Wide Voltage 2 Way Remote Control Switch Miniature Universal Learning Code Normal Open and Close Feature: Product model: AK-WK02CA Product Name: Two micro controller Working voltage: 3.7V-12V (minimum 4V required for jog mode) Power consumption situation: Standby current is only 7MA, working is 30MA current Coding method: learn code pairing, can learn fixed code and learning code chip remote control Working frequency: 433MHz Working mode: Jog (default), self-locking, interlocking Load size: <= 1A (equipment within 12W for safe use) Product size: 20 x 22 x 12mm How to use: Learning method and step description:   1. Jog mode: Hold down the learning button, press the button  once  when the indicator light, short press A button, the indicator light flashes twice, then short press B button, the indicator light flashes twice, it is “jog mode'' Learning success. 2. Self-locking mode: Hold down the learning button,  press the button  once  when the indicat
Read more